Cabinet door painting

So over the last few days I have removed all of the cabinet doors bagging and tagging all hardware along with a location tag on each door. 

steps taken so far in door prep

1. removed hinges, and any other hardware, tagging each with location
2. used a commercial strength degreaser to clean doors.  I was amazed at how dirty the doors were upon close inspection.
3. set the doors aside so they cold dry and the degreaser would continue to work.
4. using an old tooth brush to get in some of the crevices I made another pass with the degreaser and set the doors aside to dry

I will cover sanding later this afternoon when I start to sand the first door.